VWD Sprinter 144 WB Passenger Rear Quarter Double-Sliding Window | SR104-DS
Double Sliding Van Window for Sprinter Passenger Side Rear Quarter | VWD SR104-DS (2007-2027)
Bring maximum ventilation flexibility to the rear living or sleeping area of your Sprinter with the VWD SR104-DS Double-Sliding Van Window. Two independently sliding glass panels let you open either side of the window or both sides at once, giving you far more control over airflow than a conventional single-slider design.
The SR104-DS combines versatile ventilation with an integrated bug screen, integrated thermal privacy shade, 4 mm solar privacy glass with 17% UV transmission, improved secure latching, and a clean all-glass exterior appearance. The sliding opening measures up to 14-1/2" W x 15-7/8" H (368.3 mm x 403.2 mm), making it an excellent ventilation upgrade for the rear living and sleeping area of a Sprinter camper van conversion.
Key Features
- Dual sliding panels for maximum ventilation control
- Open either sliding panel independently or open both sides simultaneously
- Opening up to 14-1/2" W x 15-7/8" H (368.3 mm x 403.2 mm)
- Integrated bug screen for fresh airflow without insects
- Integrated thermal privacy shade for privacy, light control, and interior comfort
- 4 mm solar privacy glass with 17% UV transmission.
- Improved latching for secure daily use
- Clean all-glass exterior appearance
- Urethane-bonded installation for an OEM-style, weather-sealed finish
- Manufactured in China
- 1-year warranty
Why Choose a Double-Sliding Van Window?
Unlike a traditional slider with only one movable glass panel, the SR104-DS incorporates two independently operating sliding panels. This gives you more control over where fresh air enters your van and allows you to adapt ventilation to your interior layout, sleeping position, weather conditions, and airflow needs.
- Open the front sliding panel independently
- Open the rear sliding panel independently
- Open both panels simultaneously
- Greater ventilation flexibility than a conventional single slider
- Improved cross-flow ventilation throughout the van
- Excellent airflow for rear sleeping and living areas
- Ideal for camper van and adventure van conversions
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Model Years: 2007-2027
- Wheelbase: 144"
- Roof Height: Low Roof or High Roof
- Window Position: Passenger Side Rear Quarter
Technical Specifications
| SKU | SR104-DS |
|---|---|
| Window Type | Double-Sliding Van Window |
| Vehicle | Mercedes-Benz Sprinter Van |
| Model Years | 2007-2027 |
| Wheelbase | 144" |
| Roof Height | Low Roof or High Roof |
| Window Position | Passenger Side Rear Quarter |
| Overall Size | 1631 mm x 705 mm (64.21 in x 27.76 in) |
| Opening Size | Up to 14-1/2" W x 15-7/8" H (368.3 mm x 403.2 mm) |
| Sliding Panels | Two Independently Sliding Glass Panels |
| Glass | Solar privacy glass |
| Screen | Integrated Bug Screen |
| Shade | Integrated Thermal Privacy Shade |
| Latch | Improved Secure Latching |
| Installation | Urethane-Bonded |
| Country of Origin | Made in China |
| Warranty | 1 Year |
| Glass Thickness | 4 mm |
| UV Transmission | 17% |
Learn more about UV transmission ↗
Maximum Ventilation Control
The double-slider configuration gives you more usable ventilation options than a traditional single-slider window. Open one side when you want directional airflow or open both sliding panels to maximize fresh-air circulation. This flexibility is especially useful in camper van layouts where beds, cabinetry, seating, or other interior components can influence airflow and window access.
Integrated Bug Screen & Thermal Privacy Shade
The SR104-DS includes both an integrated bug screen and an integrated thermal privacy shade. The screen lets you enjoy fresh air while keeping insects out, and the thermal privacy shade adds privacy, light control, and comfort when camping or sleeping in the van.
Installation
The SR104-DS is a urethane-bonded van window. Confirm all measurements and dry-fit the window before cutting or applying urethane. After cutting the opening, deburr and protect exposed metal edges. Clean and prime according to your automotive urethane system requirements. Set the window, properly support and secure it during curing, and allow the urethane to reach its required safe-drive-away cure time before driving the vehicle.  
Mercedes Sprinter SR104 Installation Overview
Installing the SR104 passenger-side rear quarter windows requires removing a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SR104-DS – Double-Sliding Window
- SR104-F – Fixed Glass Window
- SR104-SE – SE-Series Sliding Window
- 2007–2027 Mercedes-Benz Sprinter
- 144" Wheelbase
- Low Roof or High Roof
- Passenger Side Rear Quarter Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the rear quarter cavity.
- Dry-fit the actual SR104 window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration and exact SR104 window before cutting. The illustrated cut area is for reference only, not an exact cutting template.
FAQ
What van does the SR104-DS fit?
The VWD SR104-DS is designed for Mercedes-Benz Sprinter vans from 2007-2027 with a 144" wheelbase, Low Roof or High Roof. It installs in the passenger side rear quarter position.
What are the measurements?
Overall size: 1631 mm x 705 mm (64.21 in x 27.76 in). Sliding opening: up to 14-1/2" W x 15-7/8" H (368.3 mm x 403.2 mm).
What makes this different from a standard slider?
The SR104-DS has two independently sliding glass panels instead of a single movable panel. You can open the front side, rear side, or both sides simultaneously for greater ventilation flexibility and airflow control.
Does it include a bug screen?
Yes. The SR104-DS includes an integrated bug screen for fresh airflow while helping keep insects outside the van.
Does it include a privacy shade?
Yes. An integrated thermal privacy shade provides privacy, light control, and additional interior comfort.
What type of glass is used?
4 mm solar privacy glass with 17% UV transmission.
How is it installed?
The SR104-DS uses a urethane-bonded installation. Always dry-fit before installation, prepare and protect cut metal edges, clean and prime according to your urethane system requirements, set and secure the window, and allow the urethane to fully cure according to the manufacturer's specifications before driving.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" |
| Model Years | 2007–2027 |
| Roof Height | Low Roof or High Roof |
| Position | Passenger Side Rear Quarter |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
SR104-DS spec sheet & technical drawing
Sprinter 144 WB Passenger Rear Quarter Double-Sliding Window. View the technical drawing below for this model.
| Drawing units | Millimeters; see the PDF for view-specific notes |
|---|
Use the drawing to review the profile and dimensions. Confirm the exact model, position and measurements before cutting; the PDF is not a full-size cutout template.
Search all VWD van window spec sheets · Window installation guides
Made with care
Heirloom quality
Premium materials
Classic styling
