VWD Sprinter 170 WB Driver Rear Quarter Fixed Glass Window | SL103-F
Sprinter Driver Side Rear Quarter Fixed Glass Window (170 WB) | VWD SL103-F
Factory look. Solid fixed glass. Direct-fit for the Sprinter driver's side rear quarter on 170 wheelbase vans. Grey solar privacy glass for cleaner visibility with real privacy.
Key Features
- Solid fixed glass OE-style window
- Position: driver side rear quarter
- Fitment: Mercedes Sprinter 170" wheelbase
- Grey solar privacy glass
- Solar privacy glass
- Tempered automotive safety glass (DOT/SAE)
- Urethane-bonded installation for a sealed, factory-style finish
- When available, normally ships in 3–5 Business Days (plus carrier transit time)
- 1 year warranty
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Window position: Driver Side Rear Quarter
- Wheelbase: 170"
- Model years: 2007–2027
- Roof height: Low Roof or High Roof
Technical Specifications
| SKU | SL103-F |
|---|---|
| Window Type | Solid Fixed Glass OE Style Van Window |
| Vehicle | Mercedes-Benz Sprinter Van |
| Window Position | Driver Side Rear Quarter |
| Wheelbase | 170" |
| Model Years | 2007–2027 |
| Roof Height | Low Roof or High Roof |
| Glass | Solar privacy glass |
| Glass | Solar privacy glass |
| Safety | Tempered Automotive Safety Glass (DOT/SAE) |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
| Glass Thickness | 4 mm |
| UV Transmission | 17% |
Learn more about UV transmission ↗
Measurements
Measurements: 1290mm x 768mm (50.79" x 30.24")
Installation
This is a urethane-bonded window. Dry-fit first. Prep the opening, treat the cut edge, clean, and prime per urethane specs. Set the window with automotive urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Mercedes Sprinter SL103 Installation Overview
Installing the SL103 driver-side rear quarter windows requires removing a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL103-AW – Premium Awning Window
- SL103-CA – Crank-Out Awning Window
- SL103-F – Fixed Glass Window
- SL103-DS – Double-Sliding Window
- Driver Side Rear Quarter Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the rear quarter cavity.
- Dry-fit the actual SL103 window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the exact SL103 model, Sprinter configuration, and actual vehicle before cutting. The illustrated cut area is a visual reference, not an exact cutting template.
FAQ
What vehicles and positions does SL103-F fit?
Mercedes-Benz Sprinter van. Position: driver's side rear quarter. Fitment listed for 2007–2027 Sprinter vans with 170" wheelbase and low roof or high roof.
What are the measurements?
Measurements: 1290 mm x 768 mm (50.79 in x 30.24 in).
What glass and UV rating does it use?
Grey solar privacy glass .
Is the glass safety-rated?
Yes. Tempered automotive safety glass built to DOT/SAE standards.
How is it installed?
Urethane-bonded installation using automotive glass urethane. Prep and prime per urethane specs, set the glass, and support during cure.
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 170" |
| Model Years | 2007–2027 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
Made with care
Heirloom quality
Premium materials
Classic styling
